Module:TableTools

From Meta Wiki
Revision as of 03:39, 21 December 2019 by en>Pppery (Finally getting around to merging in Module:Array length (originally written by Mr. Stradivarius) over six months after writing the merged code, also minor code simplify per Dinoguy1000 on talk page)
Jump to navigation Jump to search

Documentation for this module may be created at Module:TableTools/doc 

--[[
------------------------------------------------------------------------------------
--                               TableTools                                       --
--                                                                                --
-- This module includes a number of functions for dealing with Lua tables.        --
-- It is a meta-module, meant to be called from other Lua modules, and should     --
-- not be called directly from #invoke.                                           --
------------------------------------------------------------------------------------
--]]

local libraryUtil = require('libraryUtil')

local p = {}

-- Define often-used variables and functions.
local floor = math.floor
local infinity = math.huge
local checkType = libraryUtil.checkType
local checkTypeMulti = libraryUtil.checkTypeMulti

--[[
------------------------------------------------------------------------------------
-- isPositiveInteger
--
-- This function returns true if the given value is a positive integer, and false
-- if not. Although it doesn't operate on tables, it is included here as it is
-- useful for determining whether a given table key is in the array part or the
-- hash part of a table.
------------------------------------------------------------------------------------
--]]
function p.isPositiveInteger(v)
	return type(v) == 'number' and v >= 1 and floor(v) == v and v < infinity
end

--[[
------------------------------------------------------------------------------------
-- isNan
--
-- This function returns true if the given number is a NaN value, and false
-- if not. Although it doesn't operate on tables, it is included here as it is
-- useful for determining whether a value can be a valid table key. Lua will
-- generate an error if a NaN is used as a table key.
------------------------------------------------------------------------------------
--]]
function p.isNan(v)
	return type(v) == 'number' and tostring(v) == '-nan'
end

--[[
------------------------------------------------------------------------------------
-- shallowClone
--
-- This returns a clone of a table. The value returned is a new table, but all
-- subtables and functions are shared. Metamethods are respected, but the returned
-- table will have no metatable of its own.
------------------------------------------------------------------------------------
--]]
function p.shallowClone(t)
	local ret = {}
	for k, v in pairs(t) do
		ret[k] = v
	end
	return ret
end

--[[
------------------------------------------------------------------------------------
-- removeDuplicates
--
-- This removes duplicate values from an array. Non-positive-integer keys are
-- ignored. The earliest value is kept, and all subsequent duplicate values are
-- removed, but otherwise the array order is unchanged.
------------------------------------------------------------------------------------
--]]
function p.removeDuplicates(t)
	checkType('removeDuplicates', 1, t, 'table')
	local isNan = p.isNan
	local ret, exists = {}, {}
	for i, v in ipairs(t) do
		if isNan(v) then
			-- NaNs can't be table keys, and they are also unique, so we don't need to check existence.
			ret[#ret + 1] = v
		else
			if not exists[v] then
				ret[#ret + 1] = v
				exists[v] = true
			end
		end	
	end
	return ret
end			

--[[
------------------------------------------------------------------------------------
-- numKeys
--
-- This takes a table and returns an array containing the numbers of any numerical
-- keys that have non-nil values, sorted in numerical order.
------------------------------------------------------------------------------------
--]]
function p.numKeys(t)
	checkType('numKeys', 1, t, 'table')
	local isPositiveInteger = p.isPositiveInteger
	local nums = {}
	for k, v in pairs(t) do
		if isPositiveInteger(k) then
			nums[#nums + 1] = k
		end
	end
	table.sort(nums)
	return nums
end

--[[
------------------------------------------------------------------------------------
-- affixNums
--
-- This takes a table and returns an array containing the numbers of keys with the
-- specified prefix and suffix. For example, for the table
-- {a1 = 'foo', a3 = 'bar', a6 = 'baz'} and the prefix "a", affixNums will
-- return {1, 3, 6}.
------------------------------------------------------------------------------------
--]]
function p.affixNums(t, prefix, suffix)
	checkType('affixNums', 1, t, 'table')
	checkType('affixNums', 2, prefix, 'string', true)
	checkType('affixNums', 3, suffix, 'string', true)

	local function cleanPattern(s)
		-- Cleans a pattern so that the magic characters ()%.[]*+-?^$ are interpreted literally.
		s = s:gsub('([%(%)%%%.%[%]%*%+%-%?%^%$])', '%%%1')
		return s
	end

	prefix = prefix or ''
	suffix = suffix or ''
	prefix = cleanPattern(prefix)
	suffix = cleanPattern(suffix)
	local pattern = '^' .. prefix .. '([1-9]%d*)' .. suffix .. '$'

	local nums = {}
	for k, v in pairs(t) do
		if type(k) == 'string' then			
			local num = mw.ustring.match(k, pattern)
			if num then
				nums[#nums + 1] = tonumber(num)
			end
		end
	end
	table.sort(nums)
	return nums
end

--[[
------------------------------------------------------------------------------------
-- numData
--
-- Given a table with keys like ("foo1", "bar1", "foo2", "baz2"), returns a table
-- of subtables in the format 
-- { [1] = {foo = 'text', bar = 'text'}, [2] = {foo = 'text', baz = 'text'} }
-- Keys that don't end with an integer are stored in a subtable named "other".
-- The compress option compresses the table so that it can be iterated over with
-- ipairs.
------------------------------------------------------------------------------------
--]]
function p.numData(t, compress)
	checkType('numData', 1, t, 'table')
	checkType('numData', 2, compress, 'boolean', true)
	local ret = {}
	for k, v in pairs(t) do
		local prefix, num = mw.ustring.match(tostring(k), '^([^0-9]*)([1-9][0-9]*)$')
		if num then
			num = tonumber(num)
			local subtable = ret[num] or {}
			if prefix == '' then
				-- Positional parameters match the blank string; put them at the start of the subtable instead.
				prefix = 1
			end
			subtable[prefix] = v
			ret[num] = subtable
		else
			local subtable = ret.other or {}
			subtable[k] = v
			ret.other = subtable
		end
	end
	if compress then
		local other = ret.other
		ret = p.compressSparseArray(ret)
		ret.other = other
	end
	return ret
end

--[[
------------------------------------------------------------------------------------
-- compressSparseArray
--
-- This takes an array with one or more nil values, and removes the nil values
-- while preserving the order, so that the array can be safely traversed with
-- ipairs.
------------------------------------------------------------------------------------
--]]
function p.compressSparseArray(t)
	checkType('compressSparseArray', 1, t, 'table')
	local ret = {}
	local nums = p.numKeys(t)
	for _, num in ipairs(nums) do
		ret[#ret + 1] = t[num]
	end
	return ret
end

--[[
------------------------------------------------------------------------------------
-- sparseIpairs
--
-- This is an iterator for sparse arrays. It can be used like ipairs, but can
-- handle nil values.
------------------------------------------------------------------------------------
--]]
function p.sparseIpairs(t)
	checkType('sparseIpairs', 1, t, 'table')
	local nums = p.numKeys(t)
	local i = 0
	local lim = #nums
	return function ()
		i = i + 1
		if i <= lim then
			local key = nums[i]
			return key, t[key]
		else
			return nil, nil
		end
	end
end

--[[
------------------------------------------------------------------------------------
-- size
--
-- This returns the size of a key/value pair table. It will also work on arrays,
-- but for arrays it is more efficient to use the # operator.
------------------------------------------------------------------------------------
--]]

function p.size(t)
	checkType('size', 1, t, 'table')
	local i = 0
	for k in pairs(t) do
		i = i + 1
	end
	return i
end


local function defaultKeySort(item1, item2)
	-- "number" < "string", so numbers will be sorted before strings.
	local type1, type2 = type(item1), type(item2)
	if type1 ~= type2 then
		return type1 < type2
	else -- This will fail with table, boolean, function.
		return item1 < item2
	end
end

--[[
	Returns a list of the keys in a table, sorted using either a default
	comparison function or a custom keySort function.
]]
function p.keysToList(t, keySort, checked)
	if not checked then
		checkType('keysToList', 1, t, 'table')
		checkTypeMulti('keysToList', 2, keySort, { 'function', 'boolean', 'nil' })
	end
	
	local list = {}
	local index = 1
	for key, value in pairs(t) do
		list[index] = key
		index = index + 1
	end
	
	if keySort ~= false then
		keySort = type(keySort) == 'function' and keySort or defaultKeySort
		
		table.sort(list, keySort)
	end
	
	return list
end

--[[
	Iterates through a table, with the keys sorted using the keysToList function.
	If there are only numerical keys, sparseIpairs is probably more efficient.
]]
function p.sortedPairs(t, keySort)
	checkType('sortedPairs', 1, t, 'table')
	checkType('sortedPairs', 2, keySort, 'function', true)
	
	local list = p.keysToList(t, keySort, true)
	
	local i = 0
	return function()
		i = i + 1
		local key = list[i]
		if key ~= nil then
			return key, t[key]
		else
			return nil, nil
		end
	end
end

--[[
	Returns true if all keys in the table are consecutive integers starting at 1.
--]]
function p.isArray(t)
	checkType("isArray", 1, t, "table")
	
	local i = 0
	for k, v in pairs(t) do
		i = i + 1
		if t[i] == nil then
			return false
		end
	end
	return true
end

-- { "a", "b", "c" } -> { a = 1, b = 2, c = 3 }
function p.invert(array)
	checkType("invert", 1, array, "table")
	
	local map = {}
	for i, v in ipairs(array) do
		map[v] = i
	end
	
	return map
end

--[[
	{ "a", "b", "c" } -> { ["a"] = true, ["b"] = true, ["c"] = true }
--]]
function p.listToSet(t)
	checkType("listToSet", 1, t, "table")
	
	local set = {}
	for _, item in ipairs(t) do
		set[item] = true
	end
	
	return set
end

--[[
	Recursive deep copy function.
	Preserves identities of subtables.
	
]]
local function _deepCopy(orig, includeMetatable, already_seen)
	-- Stores copies of tables indexed by the original table.
	already_seen = already_seen or {}
	
	local copy = already_seen[orig]
	if copy ~= nil then
		return copy
	end
	
	if type(orig) == 'table' then
		copy = {}
		for orig_key, orig_value in pairs(orig) do
			copy[deepcopy(orig_key, includeMetatable, already_seen)] = deepcopy(orig_value, includeMetatable, already_seen)
		end
		already_seen[orig] = copy
		
		if includeMetatable then
			local mt = getmetatable(orig)
			if mt ~= nil then
				local mt_copy = deepcopy(mt, includeMetatable, already_seen)
				setmetatable(copy, mt_copy)
				already_seen[mt] = mt_copy
			end
		end
	else -- number, string, boolean, etc
		copy = orig
	end
	return copy
end

function p.deepCopy(orig, noMetatable, already_seen)
	checkType("deepCopy", 3, already_seen, "table", true)
	
	return _deepCopy(orig, not noMetatable, already_seen)
end

--[[
	Concatenates all values in the table that are indexed by a number, in order.
	sparseConcat{ a, nil, c, d }  =>  "acd"
	sparseConcat{ nil, b, c, d }  =>  "bcd"
]]
function p.sparseConcat(t, sep, i, j)
	local list = {}
	
	local list_i = 0
	for _, v in p.sparseIpairs(t) do
		list_i = list_i + 1
		list[list_i] = v
	end
	
	return table.concat(list, sep, i, j)
end

--[[
-- Finds the length of an array, or of a quasi-array with keys such
-- as "data1", "data2", etc., using an exponental search algorithm. 
-- It is similar to the operator #, but may return
-- a different value when there are gaps in the array portion of the table.
-- Intended to be used on data loaded with mw.loadData. For other tables, use #.
-- Note: #frame.args in frame object always be set to 0, regardless of 
-- the number of unnamed template parameters, so use this function for
-- frame.args.
--]]

function p.length(t, prefix)
	-- requiring module inline so that [[Module:Exponental search]]
	-- which is only needed by this one function
	-- doesn't get millions of transclusions
	local expSearch = require("Module:Exponential search")
	checkType('length', 1, t, 'table')
	checkType('length', 2, prefix, 'string', true)
	return expSearch(function(i)
		local key
		if prefix then
			key = prefix .. tostring(i)
		else
			key = i
		end
		return t[key] ~= nil
	end) or 0
end
function p.inArray(arr, valueToFind)
	checkType("inArray", 1, arr, "table")
	
	-- if valueToFind is nil, error?
	
	for _, v in ipairs(arr) do
		if v == valueToFind then
			return true
		end
	end
	
	return false
end

return p
Retrieved from "https://meta.skywiki.org/wiki/Module:TableTools?oldid=2658"